Racing Rings consists of three rods one each of copper, aluminum and PVC, Ring magnet is dropped down the PVC rod, it falls unobstructed, Two metal rods create an induced magnetic field to that adds resistance to the rings travel, metals are different, they fall at different rates
Current Balance, used as an accessory to Air Core Solenoid to measure the force experienced by a conducting loop carrying an electric current when, placed in a magnetic field.
Air core solenoid, coils wound on a plastic tube with approximately 575 turns of copper wire, can carry a current of 5A continuously or 10A intermittently.
Hall Effect Apparatus, Features: n-type GaAs Hall sensor chip, Two-axis mechanical traverse for field plotting, 3-1/2 digit current and voltage meters, Metal storage case for the Hall Effect board, Reversing switch for exploring the elimination of systematic error
Demonstration Induction Coil, Heavy Gauge Enamelled Copper Wire Wound On Former 110 X 30 mm. Secondary Coil Of Fine Enamelled Copper Wire On Former 120 X 82 mm. Both Coils Fitted With 4 mm Sockets, With Primary Of Heavy Gauge Enamelled Copper Wire
Demonstration Compass, 10Cm Long Magnetic Needle On Compass Map, Easy To Demonstrate The Cardinal Points Of A Compass And Determine All Their Directions.
Induction Apparatus, Operating Voltage: 2-12 V, Dcframe Coil: Approx. 185X125 mm2, Total Dimensions: Approx. 585X200X55 mm3, Demonstrating The Induced Voltage In A Frame Coil That Is Moved Through The Magnetic Field Produced By A Magnet Plate Of Limited Area.
Hydro-Electric Power Station - Working Water Turbine To Generate Electricity, Composed Of A Well Made Turbine With Transparent Cover Connected To A Small Motor To Generate Electricity. Ideal For Classroom Demonstrations
Demonstration Dynamo, Hank Crank, Electrical Output Via 4mm Terminals, Hand Powered, May Also Be A Motor Powered By 6 To 8V Power Supply, Model Is Mounted On A Base Plate 200 X 125 mm Approx. Which Also Carries A Hand-Drive Pulley 125 mm Diameter Coupled
Transformer Accessory Kit 2, Lenz s law transformer accessory kit, demonstrate the production of large magnetic fields and lenz s law damping on pendulums with and without slits
Tangent Galvanometer, Features copper magnet wire, adjustable potentiometer, compass and non-magnetic stand. Measure an electric current by determining the magnitude and direction of the horizontal component of Earths magnetic field
Oersted's Apparatus, demonstrates the action of electric current on a magnet. A cobalt steel needle (75mm long) with agate bearing supported by pivot, mounted on a plastic base and surrounded by rectangular frame fitted with terminals, 0.6 lbs, 8.0x7.5x1.8in
Eddy Current Demonstration, Demonstrate The Amazing Lenz s Law With This Apparatus. Consists Two Masses Drop Down A 33Cm Copper Tube. One Is Steel, One Is A Neodymium Magnet, Two Masses Drop Down A 33Cm Copper Tube. One Is Steel, One Is A Neodymium Magnet
Demonstration Electromagnet, Requires Power Supply, Copper Wire Is 23Swg - Diameter (0.61mm), Number Of Turns: 230, Resistance: 0.8 Ohm, Inductance: 1.6Mh, Voltage Supplied Through Those Connections Power The Electromagnet (Maximum Of 12V)
Lenzft s Law Kit, includes: -Lenzft s law apparatus -Dynamometer -2 magnets, Length (in): 13.5, Width (in): 5.8, Height (in): 1.5, provides the necessary tools to discover concepts involving Faradyft s Law, magnetism, and eddy currents
Basic Plotting Compass, 16mm, Glass Face, Aluminum Case, Diameter: 0.6 In. (1.3Cm), One Individual Unit, Provide A Simple, Teachable Way To Demonstrate Magnetic Fields In Class. Simple Use And Easy Readability Make It Straight-Forward For Students To Map Magnetic Fields
Lenz' Law - Open & Closed Loop, Simple, Economical Device, Constructed Of Cast Iron Base And Aluminum Ring, Used To Demonstrate The Induction Of An Magnetic Field, This Teaches Faraday'S Law Of Induction As Well As Lenz' Law.
Barlow'S Wheel, Equipped With Neodinium-Ironboron Magnets That Generate A Strong Magnetic Field Over The Wheel That Is Therefore Set On Motion When Crossed By Currents. Requires Aa Batters, Discover Lorentz Force Without Using Mercury
Basic St. Louis Motor, Useful In Demonstrating The Operations Of A Dc Motor, Consisting Of A Two-Pole Armature Mounted Between Magnets. Steel Supports Are Mounted On A Ridged Plastic Base. Operates On 3 To 6 V Dc.
List View
Easy View (new)
