Sodium Hydroxide

Ratings:
Avg. Ratings: 5.0 (1 Review)

Total Ratings: 1
Avg. Ratings: 5.0 out of 5

Was this review helpful? Yes No
Yes: 2 No: 0 
Education / Lab. Tech. / Calgary
Yes, I recommend
I used this product and always got good results, will buy this again and recommend others to buy this
Reply
BOREAL.com associate Published 01/26/2021
Thank you for sharing! We appreciate your feedback. We'd also like to thank you for recommending our product too!
SS0550-2.5KGR SS0575-1L SS0574-500ML SS0582-500ML SS0580-500ML SS0570-500G SS0595-500ML SS0600-1L SS0600-500ML SS0550-2.5KG SS0600-3.8L SS0580-1L SS0550-100GR SS0550-100G SS0593-100ML SS0570-CONC SS0580-3.8L SS0582-1L SS0570-2.5KG SS0581-500ML SS0601-500ML SS0550-500G SS0550-500GR SS0576-500ML
470302-558EA 32.95 CAD
470302-558 470302-568 470302-546 470302-556 470302-578 470302-566 470302-544 470302-548 470225-676 470225-802 470225-804 470302-572 470302-550 470302-560 470302-582 470302-570 470302-580 470302-576 470302-554 470302-564 470302-542 470302-574 470302-552 470302-562
Sodium Hydroxide
Chemicals for Science Education
CAS Number: 1310-73-2
Formula: NaOH
Density: 2.13 g/mL
Boiling and Freezing Point: 1390°C, 318°C
Solubility: Water and Alcohol
Synonyms: Caustic Soda
Shelf Life: 36 Months

Note: The chemical specifications for some items on this product page may differ from the specifications listed above. For more information, consult the Safety Data Sheet or contact your Ward's representative.

Delivery information: This product is designed for educational and teaching laboratories, and no certificate of analysis is available.

Caution: This product is corrosive and toxic.



   
 

ORDER

Disposal

This disposal method is published for your convenience. You MUST have checked with your federal, state, and local regulations before using this method and these methods are only applicable for small laboratory sized quantities.

Use a lab apron, chemical resistant gloves and goggles before following the below method to dispose of hazardous waste.

 1. The concentration of the base should be 1 M or less. Dilute it to this concentration if it is more concentrated. Use a large beaker and place it in a fume hood.
  a. When dissolving a base, heat may be evolved. Ice can be used to help control the heat.
  b. Work with a small amount of base at first, and then scale up.
 2. Slowly add dilute hydrochloric acid to the base until the mixture is neutralized to about a pH of 7.
 3. Pour the final solution down the drain with at least a 20-fold excess of water.

Solution Prep

To prepare a solution, determine the formula weight of the material, the concentration (Molarity) of the solution, and the amount of solution desired in Liters. Once this information has been obtained, use the following formula:
(Formula Weight) x (Concentration) x (Desired Volume) = Number of grams in desired volume of liquid

For a 1 M, 1 L solution:
(Formula Weight) x (1 mol/L) x (1 L) = x g added to 1-L volumetric flask. Dilute to a final volume of 1 L with DI Water.

PRODUCT RESOURCES

WRITE A REVIEW

REVIEWS (1)